Advanced Industrial Aeration
1212 Catherine St , Orlando , Florida, United States

This is an entirely new method of aeration. Our Patented Technology transfers so much dissolved Oxygen that in a clean water test we reach maximum saturation in the time it takes to flow only half of the containment. Our process is simple, we draw from one end and inject the water in the other end through our patented Taeration Nozzle. This exclusive Push-Pull system allows for complete circulation and De-Stratification of your containment regardless of shape or depth. Drawing in only ambient air we are capable of air/water ratios as high as 10 to 1 and are achieving this using a fraction of the Horse Power used by all other methods. Retrofitting Industrial Applications with out of the gate energy saving up 70% makes this a long awaited solution for:

Solid Waste Facilities - Leachate Lagoons
Wastewater Treatment Plants Aerobic Digesters
CAFO (Concentrated Animal Feed Operations)
Power Plant Discharge
Paper/Textile Mills
Bardenpho
Ox Ditches
Lake and Pond
Aquacultu

Aeration, Mixing, and De-Gassing all with one energy source

Aeration

With the highest transfer rate per ft. of depth (2.8%) our technology transfers more of what the EPA defines as a "micro-bubble" than any other method available today. In fact in a clean water test we reach maximum saturation of the entire containment after re-circulating only half of the containment through our Taeration nozzle regardless of its shape or depth. More O2 results in higher densities and faster growth rates.

Mixing and Circulation

Drawing water from one end and injecting it back into the opposite end ensures proper circulation and disbursement of the O2 throughout. Crucial in a Bio-Floc system we mix 120 Gallons for each single gallon that passes through our Taeration nozzle. This not only creates great water flow or tank velocity, but also keeps the floc in suspension eliminating problematic ammonia pockets.

De-Gassing

Our Taeration technology injects air and water at a ratio averaging of 3 to 1. For each gallon of water that flows through the nozzle, 3 gallons of air are entrained and injected out the exit cylinder. Often overlooked and rarely tested for this high ratio de-gasses CO2 and other noxious gasses from the water. A fishes respiratory rate is governed by O2, however, increased co2 levels in the water will reduce the rate at which CO2 is released from the blood through the gills. This can lead to not only stunted growth rates, but disease as well.

Injection Point

Our Non-Venturi naturally aspirating system is capable of pulling a near absolute vacuum, providing a perfect injection point for Ozone or pure oxygen.