Electric Power
48 products listed

Protective enclosure for thermal imager MC320 Series.This protective enclosure is suitable for light duty incl. air purging and cooled front plate.

Adaptor for mounting rail for thermal imagers and various pyrometer mountings.Adaptor for mounting rail (MCS640) to camera tripod (1/4'') and 3 hole (various IMPAC Pyrometer mountings, e.g. Series 140)

Adjustable Mounting Support for Pyrometer series and thermal imager enclosures. For Pyrometer series 5 series 6 series 12 series 140

Pre configured PC for all fixed-installed thermal imagers with the actual real time software, available as Desktop PC, 19"Rack PC and Notebook PC. Desktop PC Display: 17“ TFT screen (min.) Peripherals: Incl. keyboard and mouse  Reference number: 3 832 400 19" Rack-PC Display:…

DIN rail mounted power supply for MCS640 and ID enclosures. Input: 100 ... 245 V AC, 50 ... 60 Hz Output: 24 V DC, 2.5 A Housing: Din rail mount housing, width 45 mm

For pyrometer types: Series 5: IN 5 , IN 5 plus , IS 5 , IGA 5 , ISQ 5 , ISQ 5-LO , IS 5-LO , IGA 5-LO , IS 5-LO/GL IS 50-LO plus , IGA 50-LO plus Series 6: all units Series 12: IS 12 , IGA 12 , ISR 12-LO , IGAR 12-LO Series 140: IN 140 ,…

Power supply (Int’l) for thermal imager MCS640 and enclosures of ID series; including international plug adapters and system cable to camera: Camera permanently on Voltage input: 100 ... 240 V AC Voltage output: 24 V DC, max. 1.25 A

Connecting cable for individual plug for power supply of thermal imager MCS640 and enclosures of ID series with 24 V DC. Reference numbers: 3 821 360 (5 m) 3 821 370 (10 m) 3 821 380 (15 m) 3 821 390 (25 m)

Reference numbers: 3 829 850 (7.5 m) 3 829 860 (15 m) 3 829 870 (25 m)  

With trigger inputs and electrical alarm hand over to programmable logic controller (PLC), test benches and process control units: Processing of analogue and digital signals Input: 4 digital inputs (4 DI) Outputs: 4...16 digital outputs (4...16 DO) Outputs: 4...16 analogue outputs (4...16…

With trigger inputs and electrical alarm hand over to programmable logic controller (PLC), test benches and process control units: Inputs: 12 digital 24 V inputs (12 digital in) Outputs: 6 digital 24 V outputs (6 digital out) Interface to RTV Contro RT: Fast Ethernet with 10/100 Mbit/s via RJ45 connector…

Thermal Image Display The LumaSpec™ Offline Analyzer software from LumaSense Technologies features a full suite of tools designed for advanced image analysis of radiometric thermal image data. Tools such as average, median, sharpen, and gaussian filters allow you to highlight relevant details…

Windows-Based Thermal Imaging Software that Offers High-Speed Real-Time Data Acquisition and Image Analysis Capabilities Profitability: Reduce waste and improve yield by minimizing time to corrective action Production: Cut unscheduled downtime with early detection of process and equipment…

Key Features Prevent failures by proactively monitoring the furnace temperature Determine precisely when to perform soot-blowing Set trigger alarms to take quick corrective actions when gas temperatures approach slagging/fouling limits with continuous online monitoring Measure and quantify trade-offs…

Key Benefits Automated, continuous thermal monitoring of substation for performance and safety Early and remote fault detection Monitor newly installed assets or older assets after maintenance to identify risk for infant mortality or faults Continuous monitoring without personnel constraints Replace…