Electric Motor & Contracting3703 Cook Boulevard, , Chesapeake, Virginia, United States
Since Feb, 2020
- Rewinding up through 13,200VAC, using epoxy vacuum pressure impregnation (VPI) on all form wound motors through 7KV and B-stage hot pressed coils above 7KV
- An in-house machine shop capable of handling the majority of your machining needs, such as shaft repair/replacement, bearing housing repairs, complete internal horizontal and vertical alignment, etc.
- Dynamic balancing of rotating components, typically to ISO 1940 standards
- Replacement of stator laminations with low loss, laser cut laminations
- Shaft repair & replacement, repair of squirrel cage rotors, including rotor bar replacement, lamination replacement and in some cases, complete new rotor manufacturing
- Upgrading of existing motors, such as rewinding for increased hp or changing bearing design/configuration for optimum vibration and reliability.
- Full voltage no load testing of all motors up through 18,000 hp @ 13.2KV.
- Our Dynamometer capabilities are being increased to offer full load testing, both horizontal and vertical, up to 2000hp (at 1800 rpm)
- Reverse Engineering
About EMC Nuclear Services
Building Staying true to our core value of providing exceptional service and value to our customers, EMC’s Nuclear Services Building was designed, constructed and outfitted with the equipment and tooling necessary to perform all contaminated motor refurbishment and rewind activities in-house. This foresight and investment has eliminated the need for costly and schedule impacting sub-contract services, such as; decontamination, contaminated burnout, SL1 Coatings, Housing Line Bores, core replacement, rewinds, machining services and more. Our continual focus on enhancing our facilities and capabilities, coupled with our aggressive efforts to eliminate non-value added mark-up’s and expenses has enabled EMC to pass a significant savings onto our nuclear customers, all while maintaining a quality track record of ZERO NUPIC findings.
Power Generation Services
EMC has served and expanded our electric motor repair services to our total electrical and mechanical service capabilities of today; to support Power Generation customers; EMC is the premier repair shop on the east coast with mechanical and electrical equipment repair, engineering services, and field services. Whether it is pump overhauls, switchgear servicing, generator rewinds or electric motor rewinding; we have the total capabilities to insure a quality repair to maintain your plant’s operational uptime. EMC repairs, rewinds and remanufactures rotating poles for hydrogenation and can utilize our experience and facilities for your wind generators. EMC can rebuild all your exciter components and provide testing onsite or in our facilities. EMC is currently and has been a SKF Certified Rebuilder of electrical motors since 1995.EMC has a dedicated crew of Quality Assurance Personnel. EMC has maintained an ISO Certified program since 1999. Our Chesapeake and Courtland shops are both ISO 9001:2008 certified. EMC is a member of the EASA, a member of the Large Electric Motor Users Group (LEMUG), Pump Users Group (PUG), International Maintenance Institute and NETA affiliate. 24-7; EMC is there to assist you in the maintaining of your industrial facility.
Industrial Repair Services
EMC has served and expanded our electric motor repair services to our total electrical and mechanical service capabilities; from our beginnings in 1960. We are the premier electric motor repair shop on the east coast with mechanical and electrical equipment repair, engineering services, and field services. Whether it is pump overhauls, switchgear servicing, generator rewinds or electric motor rewinding; we have the total capabilities to insure a quality repair to maintain your plant’s operational uptime and meet your reliability goals. EMC is currently and has been a SKF Certified Rebuilder of electrical motors since 1995.EMC has a dedicated crew of Quality Assurance Personnel. EMC has maintained an ISO Certified program since 1999. Our Chesapeake and Courtland shops are both ISO 9001:2008 certified. EMC is a member of the EASA, a member of the Large Electric Motor Users Group (LEMUG), Pump Users Group (PUG), International Maintenance Institute and NETA affiliate. 24-7; EMC is there to assist you in the maintaining of your industrial facility.
Company Name | Electric Motor & Contracting |
Business Category | Electric Power |
Address | 3703 Cook Boulevard, Chesapeake Virginia United States ZIP: 23323 |
President | NA |
Year Established | 1960 |
Employees | NA |
Memberships | NA |
Hours of Operation | NA |
- Electric Motor And Pump Repairs
- Nuclear Services Building
- Power Generation Services
- Industrial Repair Services